Water potabilization sludges (WPS) are a heterogeneous waste generated from the coagulation-flocculation process of drinking water production, whose composition is highly dependent on the geological context of reservoirs, the composition and volume of treated water, and the types of coagulants used. For this reason, any feasible approach for reusing and valorising of such waste cannot be disregarded from the detailed investigation of its chemical and physical characteristics and they have to be evaluated at a local scale. In this study, WPS samples from two plants serving the Apulian territory (Southern Italy) were subjected for the first time to a detailed characterization with a view to evaluating their recovery and reuse at a local scale as a raw material for producing alkali activated binders. WPS samples were investigated by X-ray fluorescence (XRF), X-ray powder diffraction (XRPD) including phase quantification by the combined Rietveld and reference intensity ratio (RIR) methods, thermogravimetric and differential thermal analysis (TG-DTA), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX). Samples showed aluminium-silicate compositions with up to 37 wt% of Al2O3 and up to 28 wt% of SiO2. Small amounts of CaO were also found (6.8 and 4 wt%, respectively). The mineralogical investigation indicates the presence of illite and kaolinite as clayey crystalline phases (up to 18 wt% and 4 wt%, respectively), in addition to quartz (up to 4 wt%) and calcite (up to 6wt%) and a large amorphous fraction (63 wt% and 76 wt%, respectively). WPS were subjected to heating from 400 degrees C to 900 degrees C and mechanical treatment by high energy vibro-milling in order to determine the best pre-treatment condition in view of their use as solid precursors to prepare alkali-activated binders. Alkali activation (8M NaOH solution; room temperature curing) was attempted on untreated WPS, on 700 degrees C heated and on 10-minute high-energy milled samples, which were considered the most suitable based on the preliminary characterization. Investigations of alkali-activated binders confirmed the geopolymerisation reaction occurrence. Variations in gel features and compositions depended on the amount of reactive SiO2, Al2O3 and CaO available in the precursors. WPS heated at 700 degrees C led to the most dense and homogeneous microstructures, due to a greater availability of reactive phases. The results of this preliminary study demonstrate the technical feasibility of preparing alternative binders from the investigated Apulian WPS, paving the way for a local reuse of these waste products, leading to economic and environmental benefits.
Valorisation of Water Potabilization Sludges as Precursors for Alkali-Activated Binders: Characterization and Feasibility Study
Clausi, Marina
Formal Analysis
;Pinto, DanielaProject Administration
2023-01-01
Abstract
Water potabilization sludges (WPS) are a heterogeneous waste generated from the coagulation-flocculation process of drinking water production, whose composition is highly dependent on the geological context of reservoirs, the composition and volume of treated water, and the types of coagulants used. For this reason, any feasible approach for reusing and valorising of such waste cannot be disregarded from the detailed investigation of its chemical and physical characteristics and they have to be evaluated at a local scale. In this study, WPS samples from two plants serving the Apulian territory (Southern Italy) were subjected for the first time to a detailed characterization with a view to evaluating their recovery and reuse at a local scale as a raw material for producing alkali activated binders. WPS samples were investigated by X-ray fluorescence (XRF), X-ray powder diffraction (XRPD) including phase quantification by the combined Rietveld and reference intensity ratio (RIR) methods, thermogravimetric and differential thermal analysis (TG-DTA), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX). Samples showed aluminium-silicate compositions with up to 37 wt% of Al2O3 and up to 28 wt% of SiO2. Small amounts of CaO were also found (6.8 and 4 wt%, respectively). The mineralogical investigation indicates the presence of illite and kaolinite as clayey crystalline phases (up to 18 wt% and 4 wt%, respectively), in addition to quartz (up to 4 wt%) and calcite (up to 6wt%) and a large amorphous fraction (63 wt% and 76 wt%, respectively). WPS were subjected to heating from 400 degrees C to 900 degrees C and mechanical treatment by high energy vibro-milling in order to determine the best pre-treatment condition in view of their use as solid precursors to prepare alkali-activated binders. Alkali activation (8M NaOH solution; room temperature curing) was attempted on untreated WPS, on 700 degrees C heated and on 10-minute high-energy milled samples, which were considered the most suitable based on the preliminary characterization. Investigations of alkali-activated binders confirmed the geopolymerisation reaction occurrence. Variations in gel features and compositions depended on the amount of reactive SiO2, Al2O3 and CaO available in the precursors. WPS heated at 700 degrees C led to the most dense and homogeneous microstructures, due to a greater availability of reactive phases. The results of this preliminary study demonstrate the technical feasibility of preparing alternative binders from the investigated Apulian WPS, paving the way for a local reuse of these waste products, leading to economic and environmental benefits.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
