We present measurements of friction coefficient of lubricated laser surface textured (LST) microstructures with two different geometries. The former is made of a square lattice of microholes; the latter is constituted by a series of microgrooves. We analyze sliding velocities spanning more than two orders of magnitude to cover the entire range from the boundary to the hydrodynamic regime. In all cases, the interfacial pressure is limited to values (relevant to particular manufacturing processes) which allow to neglect macroscopic elastic deformations, piezo-viscosity and oil compressibility effects. The measured Stribeck curves data are compared with those obtained for the flat control surface and show that the regular array of microholes allows to reduce friction over the entire range of lubrication regimes with a decrease of about 50 % in the hydrodynamic regime. On the contrary, the parallel microgrooves lead to an increase of friction compared to the flat control surface with a maximum increase of about 80-100 % in the mixed lubrication regime. These remarkably opposite friction results are then explained with the aid of numerical simulations. Our findings confirm that LST may have cutting edge applications in engineering, not only in classical applications (e.g.; to reduce piston-ring friction losses in internal combustion engines) but also, in particular, in technological processes, such as hydroforming, superplastic forming, where the mapping of the frictional properties of the mold has a crucial role in determining the final properties of the mechanical component. © 2012 Springer Science+Business Media New York.

Friction properties of lubricated laser-microtextured-surfaces: An experimental study from boundary- to hydrodynamic-lubrication

Ancona A.;Tricarico L.
2013-01-01

Abstract

We present measurements of friction coefficient of lubricated laser surface textured (LST) microstructures with two different geometries. The former is made of a square lattice of microholes; the latter is constituted by a series of microgrooves. We analyze sliding velocities spanning more than two orders of magnitude to cover the entire range from the boundary to the hydrodynamic regime. In all cases, the interfacial pressure is limited to values (relevant to particular manufacturing processes) which allow to neglect macroscopic elastic deformations, piezo-viscosity and oil compressibility effects. The measured Stribeck curves data are compared with those obtained for the flat control surface and show that the regular array of microholes allows to reduce friction over the entire range of lubrication regimes with a decrease of about 50 % in the hydrodynamic regime. On the contrary, the parallel microgrooves lead to an increase of friction compared to the flat control surface with a maximum increase of about 80-100 % in the mixed lubrication regime. These remarkably opposite friction results are then explained with the aid of numerical simulations. Our findings confirm that LST may have cutting edge applications in engineering, not only in classical applications (e.g.; to reduce piston-ring friction losses in internal combustion engines) but also, in particular, in technological processes, such as hydroforming, superplastic forming, where the mapping of the frictional properties of the mold has a crucial role in determining the final properties of the mechanical component. © 2012 Springer Science+Business Media New York.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11586/366710
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 93
  • ???jsp.display-item.citation.isi??? 82
social impact