There have been studied regularities affecting the magnitude of the dynamic component of the plough resistance for cylindrical mouldboards, and its peculiarities for cylindroid mouldboards depending on the direction of arrival of the soil layer on the ploughshare. The dynamic component of the draught resistance of the plough, which is directly proportional to the square of the ploughing velocity, can be estimated by the value of a dimensionless coefficient, conditionally named the "wrapping angle of the layer". This coefficient can be found for the mouldboard surface if the path of the movement of the mid-point of the section of the soil layer is known. By example of a cylindroid surface of the mouldboard it is shown how the dynamic component of the resistance varies depending on the design parameters of the mouldboard and the direction of arrival of the soil layer onto the ploughshare. As a result of the experimental study, a reduction of the longitudinal component of the thrust on the plough body, equipped with a mouldboard with an improved design made according to the results of the theoretical study, was achieved. This reduction was obtained by reducing the friction force due to the dynamic component of the resistance forces.

A theoretical study of the limit path of the movement of a layer of soil along the plough mouldboard

Pascuzzi S.
Membro del Collaboration Group
;
2019-01-01

Abstract

There have been studied regularities affecting the magnitude of the dynamic component of the plough resistance for cylindrical mouldboards, and its peculiarities for cylindroid mouldboards depending on the direction of arrival of the soil layer on the ploughshare. The dynamic component of the draught resistance of the plough, which is directly proportional to the square of the ploughing velocity, can be estimated by the value of a dimensionless coefficient, conditionally named the "wrapping angle of the layer". This coefficient can be found for the mouldboard surface if the path of the movement of the mid-point of the section of the soil layer is known. By example of a cylindroid surface of the mouldboard it is shown how the dynamic component of the resistance varies depending on the design parameters of the mouldboard and the direction of arrival of the soil layer onto the ploughshare. As a result of the experimental study, a reduction of the longitudinal component of the thrust on the plough body, equipped with a mouldboard with an improved design made according to the results of the theoretical study, was achieved. This reduction was obtained by reducing the friction force due to the dynamic component of the resistance forces.
File in questo prodotto:
File Dimensione Formato  
1-s2.0-S0167198718306482-main.pdf

non disponibili

Descrizione: Articolo principale
Tipologia: Documento in Versione Editoriale
Licenza: NON PUBBLICO - Accesso privato/ristretto
Dimensione 2.38 MB
Formato Adobe PDF
2.38 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
STILL_2018_15_Original_V0.pdf

accesso aperto

Tipologia: Documento in Pre-print
Licenza: Creative commons
Dimensione 1.75 MB
Formato Adobe PDF
1.75 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11586/244200
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 30
  • ???jsp.display-item.citation.isi??? 19
social impact