The recent development of ultrafast laser ablation technology in precision micromachining has dramatically increased the demand for reliable and real-time detection systems to characterize the material removal process. In particular, the laser percussion drilling of metals is lacking of non-invasive techniques able to monitor into the depth the spatial-and time-dependent evolution all through the ablation process. To understand the physical interaction between bulk material and high-energy light beam, accurate in-situ measurements of process parameters such as the penetration depth and the removal rate are crucial. We report on direct real time measurements of the ablation front displacement and the removal rate during ultrafast laser percussion drilling of metals by implementing a contactless sensing technique based on optical feedback interferometry. High aspect ratio micro-holes were drilled onto steel plates with different thermal properties (AISI 1095 and AISI 301) and Aluminum samples using 120-ps/110-kHz pulses delivered by a microchip laser fiber amplifier. Percussion drilling experiments have been performed by coaxially aligning the diode laser probe beam with the ablating laser. The displacement of the penetration front was instantaneously measured during the process with a resolution of 0.41 mu m by analyzing the sawtooth-like induced modulation of the interferometric signal out of the detector system.

Direct investigation of the ablation rate evolution during laser drilling of high aspect ratio micro-holes

Mezzapesa FP;Sibillano T.;Columbo L.;Di Niso F.;Ancona A.;DABBICCO, Maurizio;De Lucia F.;LUGARA', Pietro Mario;Scamarcio, G.
2012-01-01

Abstract

The recent development of ultrafast laser ablation technology in precision micromachining has dramatically increased the demand for reliable and real-time detection systems to characterize the material removal process. In particular, the laser percussion drilling of metals is lacking of non-invasive techniques able to monitor into the depth the spatial-and time-dependent evolution all through the ablation process. To understand the physical interaction between bulk material and high-energy light beam, accurate in-situ measurements of process parameters such as the penetration depth and the removal rate are crucial. We report on direct real time measurements of the ablation front displacement and the removal rate during ultrafast laser percussion drilling of metals by implementing a contactless sensing technique based on optical feedback interferometry. High aspect ratio micro-holes were drilled onto steel plates with different thermal properties (AISI 1095 and AISI 301) and Aluminum samples using 120-ps/110-kHz pulses delivered by a microchip laser fiber amplifier. Percussion drilling experiments have been performed by coaxially aligning the diode laser probe beam with the ablating laser. The displacement of the penetration front was instantaneously measured during the process with a resolution of 0.41 mu m by analyzing the sawtooth-like induced modulation of the interferometric signal out of the detector system.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11586/137216
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 2
  • ???jsp.display-item.citation.isi??? 1
social impact